Toshiba TDP-TW420 Manual De Usuario

Descargar
Página de 51
50
51
Netw
ork and
USB memor
y
Category
Item
Description
Appli-
cation
Remote
control
Specify whether to allow the remote control of the projector from a computer.
Allowed
Presentation
Forbidden
Allowed:
The projector always accepts remote commands from a 
computer.
Presentation: Accepts only the remote commands from the computer 
by which an image is projected on the projector (Update 
automatically) using Network Utility.
Forbidden:
Always ignores any remote commands from a computer.
WEB browser
Browser authentication: Switch on/off the password authentication for 
access to the setting screen using the Projector 
Configuration Tool.
 
 
On
Off
Password: Enter the password used to access the setting screen when the 
Browser authentication is set to On. A character string (1 to 8 
characters) can be specified as desired.
[
 : Move left or right one character.] 
 [
 to 
 : Set a character.]
Confirm: [OK]
 [Cancel]
 [Enter: 
]
* To enter characters, use the numeric keypad on the remote control.
Character entry
Enter characters using numeric keys of the remote control. The character is entered with 
a beep sound if the beep sound is set to [On].
Character entry mode
Remote
control 
button
Items using characters, numbers, and symbols
(e.g., projector name and destination address)
Number only
“1” “.” “@” “-” “_”
“1”
“2” “A” “B” “C” “a” “b” “c”
“2”
“3” “D” “E” “F” “d” “e” “f”
“3”
“4” “G” “H” “I” “g” “h” “i”
“4”
“5” “J” “K” “L” “j” “k” “l”
“5”
“6” “M” “N” “O” “m” “n” “o”
“6”
“7” “P” “Q” “R” “S” “p” “q” “r” “s”
“7”
“8” “T” “U” “V” “t” “u” “v”
“8”
“9” “W” “X” “Y” “Z” “w” “x” “y” “z”
“9”
“0” “space!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~”
“0”
Deletes one character.
Deletes one character.
Using the menus 2 (Continued)
Details on individual items
[Wireless LAN settings]
<Easy Connect (USB memory)>
This feature allows users to easily connect the projector to a computer over a network, 
without making Wireless LAN settings using Network Utility.
<Mode>
Your projector is set to Ad hoc in the factory. Change the setting if you want to use the 
projector in Infrastructure mode.
<SSID>
This is an ID code for connecting to specific individuals over a wireless LAN. This may 
also be called “Network group” or “Network name”.  Please read the following carefully.
Note: When you use Ad hoc communication mode, if there is a similar SSID network 
group (for example, TDPJ1, TDPJ2, etc.) in the possible communication area, 
it is possible that your projector name will not be displayed in the Network 
Utility
 projector list column. If this is the case, set SSID to a completely different 
character string.
Set the following items if you have set the communication mode to Infrastructure.
If you have set the communication mode to Ad hoc for Network Projector setting, 
the following items should also be set.
<DHCP>
If you set DHCP to Use, the IP address of the projector is assigned automatically by the 
DHCP server. If your network environment does not assign IP addresses automatically, 
set DHCP to Not use, then set the following items IP addressSubnet mask and 
Gateway manually.
<IP address>
When DHCP is set to Not use, consult with your network administrator for the settings 
below and set the IP address manually.
An IP address is a unique number assigned to a terminal. The format is a string of four 
dot-separated three-digit numbers. (Example: 111.112.xxx.xxx)
Note: If you set the same IP address for wireless LAN with the one for wired LAN, 
network function may fail to operate properly.
<Subnet mask>
A subnet mask is used to determine what subnet the IP address assigned to a terminal 
belongs to. (Example: 255.255.xxx.xxx)
Note: If you set the same subnet work for wireless LAN with the one for wired LAN, 
network function may fail to operate properly.
<Gateway>
This value specifies the IP address of the device, such as a router, to be used to access 
servers outside the network. (Example: 111.112.xxx.xxx)