Viewsonic PJD5122 Manual De Usuario

Descargar
Página de 69
Connection
14
Many notebooks do not turn on their external video ports when connected to a projector. 
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a 
function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press 
FN and the labeled function key simultaneously. Refer to your notebook's documentation to 
find your notebook's key combination.
Connecting a monitor
If you want to view your presentation close-up on a monitor as well as on the screen, you 
can connect the COMPUTER OUT signal output socket on the projector to an external 
monitor with a VGA cable following the instructions below:
To connect the projector to a monitor:
1.
Connect the projector to a computer as described in 
.
2.
Take a suitable VGA cable (only one supplied) and connect one end of the cable to the 
D-Sub input socket of the video monitor. 
Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable 
and connect the DVI end of the cable to the DVI input socket of the video monitor.
3.
Connect the other end of the cable to the COMPUTER OUT socket on the projector.
The final connection path should be like that shown in the following diagram:
The COMPUTER OUT output only works when COMPUTER IN 1 or COMPUTER IN 2 is 
made to the projector.
To use this connection method, make sure the Active VGA Out and Active Audio Out 
functions are turned on. See 
 for details.
Notebook or desktop 
computer
VGA cable
VGA cable
VGA to DVI-
A cable
or
Monitor