Viewsonic PJ875 Manual De Usuario
19
English
4
Tracking
Choose “ Tracking” item to synchronize the signal timing of the display with that of the graphic
card. When you experience an unstable or flickering image, use this function to correct it.
4
Frequency
“Frequency” is for changing the display data frequency to match the frequency of your
computer’s graphic card. When you experience a vertical flickering bar, use this function to make
computer’s graphic card. When you experience a vertical flickering bar, use this function to make
an adjustment.
4
Horizontal Position
l
Press the left button to move the image left.
l
Press the right button to move the image right.
4
Vertical Position
l
Press the left button to move the image up.
l
Press the right button to move the image down.
4
Auto-Image
The projector automatically adjusts tracking, frequency and vertical and horizontal
position for most computers.
position for most computers.
* The image options are available only for computer sources. The projector sets these options
automatically for video sources.
4
Tint (Video mode only)
The tint adjusts the red-green color balance in the projected image.
l
Press the left key to increase the amount of green in the image.
l
Press the right key to increase the amount of red in the image.
4
Color (Video mode only)
The color setting adjusts a video image from black and white to fully saturated color.
l
Press the left key to decrease the amount of color in the image.
l
Press the right key to increase the amount of color in the image.
Image (Computer mode only)
4
Volume
l
Press the left button to decrease the volume.
l
Press the right button to increase the volume.
4
Bass
The Bass setting controls the lower frequencies of your audio source.
l
Press the left button to decrease the bass.
l
Press the right button to increase the bass.
Audio