Viewsonic PJD6683W Manual De Usuario

10

To switch the code for the remote control, press PgUp and PgDn buttons on the remote 
control together for 5 seconds or more. The initial code is set to A. 

The capability of operating your computer with the remote control gives you more 
flexibility when delivering presentations. 

1.

Connect the projector to your PC or notebook with a USB cable prior to using the 
remote control in place of your computer’s mouse. See 

"Connecting a computer" on 

page 18

 for details.

2.

Set the input signal to D-Sub / Comp. 1, D-Sub / Comp. 2 or HDMI.

3.

Press Mouse on the remote control to switch from the normal mode to the mouse 
mode. An icon appears on the screen to indicate the activation of the mouse mode.

4.

Perform the desired mouse controls on your remote control.

•

To move the cursor on the screen, press 

/

/

/

. 

•

To left-click, press 

. 

•

To right-click, press  . 

•

To operate your display software program (on a connected PC) which responds to 
page up/down commands (like Microsoft PowerPoint), press PgUp/PgDn.

•

To return to the normal mode, press Mouse again or other keys except for the 
mouse related multi-function keys.

Infra-Red (IR) remote control sensors are located on the front and the top of the projector. 
The remote control must be held at an angle within 30 degrees perpendicular to the 
projector's IR remote control sensors to function correctly. The distance between the remote 
control and the sensors should not exceed 8 meters (~ 26 feet).

Make sure that there are no obstacles between the remote control and the IR sensors on the 
projector that might obstruct the infra-red beam.

Approx

. 15°

Ap

pro

x.

+1

5°