Viewsonic VS13835 Manual De Usuario

134

ViewSonic 

Pro9500

1.8 Confirming the connection to your destination

When the network connection is established, 

the “Connection to Projector successful” screen 

is displayed.

Make sure that the right projector that you want 

to send your image to is selected, by checking 

the projector name and IP address shown in 

the screen.

1.8.1 Connection and transmission

•  To send images to the projector, click the 

[Yes]. The transmission will be started.

To display the transmitted images, select the 

LAN port as input source on the 

projector.

•  Not to send, click the 

[No], then the “LiveViewer” main menu is displayed 

in stand-by mode. (Stand-by mode is the state where there is no image 

transmission, although the network connection is established.) 

The transmission can be started, if you click   or   button on the “LiveViewer” 

main menu.

The projector you want to send your images 

to is occupied by another computer in the 

Presenter mode.

Click the 

[OK], then the “LiveViewer” main 

menu is displayed in stand-by mode. Retry 

to send your images, after the Presenter 

mode is off.

n

 This projector is currently in use (Presenting) by another user.

If you wish to use the current connection setting as a profile data for My 

Connection, check in the box for the 

[Register this setting to My Connection].

1. Connection to the network