Viewsonic VS13835 Manual De Usuario

144

ViewSonic 

Pro9500

2.1.3 Switching the display mode
The “LiveViewer” has the Single PC mode and Multi PC mode. The modes can be 

switched on the main menu.

1)  Click the   button on the main menu.

The buttons below are displayed.

2)  Select from  to  buttons, and click it.



 Switching to the Single PC mode : Your image is displayed on full screen.



- Switching to the Multi PC mode :  Your image is displayed on a quarter 

screen identified in the button.

3)  The projector screen is switched to the mode selected above, and the 

transmission of your computer image will be started to display your image on 

the screen.

4) The icon   on the main menu is replaced by the icon you selected.













The display mode can be set also by using the MULTI PC MODE in the 

PRESENTATION item in the NETWORK menu. The last setting made will take 

effect regardless of the setting method.

• The image transmission will be stopped, when you click the Single 

mode button while the projector is in the Single PC mode or you click one of the 

Multi mode buttons that shows the quarter screen which is currently displaying 

your computer images in the Multi PC mode.

• If the Multi PC mode is selected, the projector screen is automatically divided 

to 4 zones.

• When the Presenter mode is enabled and the projector is used by a computer 

in the Single PC mode, images from other computers cannot be sent to the 

projector even if the   (Full screen) button is pressed.

• When a quarter-screen occupied by another computer is selected, image 

transmission from that computer will be put on hold and the image of the 

currently specified computer will be displayed.

NOTE

2. Network Presentation

:

Status Display