Viewsonic VS13835 Manual De Usuario

13

ViewSonic 

Pro9500

Setting up

Connecting with your devices

Before connecting the projector to a device, consult the manual of the device to 

confirm that the device is suitable for connecting with this projector and prepare 

the required accessories, such as a cable in accord with the signal of the device. 

Consult your dealer when the required accessory did not come with the product or 

the accessory is damaged.

After making sure that the projector and the devices are turned off, perform 

the connection, according to the following instructions. Refer to the figures in 

subsequent pages.

Before connecting the projector to a network system, be sure to read 

Guide too.

►

Use only the appropriate accessories. Otherwise it could 

cause a fire or damage the projector and devices. 

•  Use only the accessories specified or recommended by the projector’s 

manufacturer. It may be regulated under some standard.

•  Neither disassemble nor modify the projector and the accessories.

•  Do not use the damaged accessory. Be careful not to damage the accessories. 

Route a cable so that it is neither stepped on nor pinched out.

WARNING

►

with the core to the projector. That may be required by EMI regulations.

CAUTION

• Plug-and-Play is a system composed of a computer, its operating system 

and peripheral equipment (i.e. display devices). This projector is VESA DDC 

2B compatible. Plug-and-Play can be used by connecting this projector to a 

computer that is VESA DDC (display data channel) compatible.

-  Take advantage of this feature by connecting a computer cable to the 

COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work 

properly if any other type of connection is attempted.

-  Please use the standard drivers in your computer as this projector is a Plug-

and-Play monitor.

• Do not turn on or off the projector while connected to a device in 

operation, unless that is directed in the manual of the device. Otherwise it may 

cause malfunction in the device or projector.

• The function of some input ports can be selected according to your usage 

requirements. Check the reference page indicated beside each port in the 

following illustration.

• Be careful not to mistakenly connect a connector to a wrong port. Otherwise it 

may cause malfunction in the device or projector.

-  When connecting a connector to a port, make sure that the shape of the 

connector fits the port.

-  Tighten the screws to connect a connector equipped with screws to a port.

-  Use the cables with straight plugs, not L-shaped ones, as the input ports of 

the projector are recessed.

About Plug-and-Play capability

NOTE

(continued on next page)