Viewsonic VS13835 Manual De Usuario

249

ViewSonic

Pro9500

5.1 Preparing for menu operations

If Simple Stack without an RS-232C connection is used, press the

COMPUTER

VIDEO button on the remote control or the INPUT button on the control panel

to select the port to which the cable is connected. For setting of MONITOR OUT,

refer to SETUP menu in Operating Guide.

This completes the setting.

If Intellectual Stack with the RS-232C connection is used, all settings or

modifications related to Intellectual Stack menu operations must be performed on

the Main projector. The Main projector functions according to the input settings

for Intellectual Stack.

5.2 Checking Main projector's operating status

For Intellectual Stack, all settings or modifications related to menu operations

must be performed on the Main projector. Before operating the menu for

Intellectual Stack, check if the Main projector is functioning.

Press the

MENU button on the remote control.

If the MENU dialog as shown on the right appears on

the screen, the two projectors are operating in DUAL

mode and the Main projector is operating.

Go to 5.4 Setting the menu.

If the dialog does not appear, LAMP MODE is set to ALTERNATE and either

the Main or Sub projector is operating. Go to next.

Use the ▲/▼/◄/► buttons to go into the following menu.

ADVANCED MENU > OPTION

> SERVICE > COMMUNICATION

> STACK
STACK menu will appear on screen. (Op-

erating Guide → OPTION menu)

Check the STACK MODE setting in the STACK menu.

- If MAIN is displayed, the Main projector is operating. Go to 5.4 Setting the

menu.

- If SUB is displayed, the Main projector is turned off and the Sub projector is

operating. Go to 5.3 Starting up Main projector.

5. Setting input ports using menu