Viewsonic VS11959 Manual De Usuario

ViewSonic                                                44                                                PJ513D/PJ513DB

There is no power from the power 
cable.

Plug the power cord into the AC inlet on the 
projector, and plug the power cord into the 
power outlet. If the power outlet has a switch, 
make sure that it is switched on.

Attempting to turn the projector on 
again during the cooling process.

Wait until the cooling down process has 
completed.

The video source is not turned on or 
connected correctly.

Turn the video source on and check that the 
signal cable is connected correctly.

The projector is not correctly 
connected to the input source device.

Check the connection.

The input signal has not been 
correctly selected.

Select the correct input signal with the Source 
key on the projector or remote control.

The lens cover is still closed.

Open the lens cover.

The projection lens is not correctly 
focused.

Adjust the focus of the lens using the focus 
ring.

The projector and the screen are not 
aligned properly.

Adjust the projection angle and direction as 
well as the height of the unit if necessary.

The lens cover is still closed.

Open the lens cover.

The batteries are out of power.

Replace the batteries with new ones.

There is an obstacle between the 
remote control and the projector.

Remove the obstacle.

You are too far away from the 
projector.

Stand within 8 meters (26 feet) of the 
projector.