Viewsonic Projector PJ250 Manual De Usuario

To prevent scratches place the lamp on a soft cloth. 

(1) Turn the screw that fastens the lamp cover 

counterclockwise until it turns freely. (The screw 

will not come out.)

(2)  Lift the lamp cover a little and pull it off in the direction of the arrow.

 

• The Lamp Cartridge should only be replaced after the unit has been turned off, cooled down for 

60 minute and the power cord has been unplugged. Replacement of the lamp cartridge during 

operation or immediately after operation stops may cause burns due to high temperature.

• Do not remove any screws other those specified.
• Do not touch the lamp with bare hands. Doing so could shorten the life of the lamp.
• If the lamp has reached the end of its usable life, the lamp bulb may shatter.  If the lamp 

shatters, contact ViewSonic Customer Support center immediately.