Viewsonic VS15115 Manual De Usuario

30

Allows the projector to turn off automatically if no input signal is detected after a set 
period of time.

No matter whether the projector detect signal or not, the projector will turn off 
automatically when the countdown has finished.

• Green Mode: Enable this function when power consumption is under 0.5W.

• Active VGA Out: Set whether the VGA OUT function works when the projector is in 

standby (powered off but connected to AC power).

• Active audio out: Set whether the audio out function works when the projector is in 

standby (powered off but connected to AC power).

• Quick Power Off

• On: The projector will directly shut down without cooling procedure.

• Off: The projector will shut down following normal cooling procedure.

• Smart Restart: Selecting On enables you to restart the projector immediately within 

3 minutes after turning it off. After 3 minutes, if the projector is not turned on again, 
it will directly enter the standby mode.

Enable or disable closed captions by selecting CC1 (closed caption1, the most 
common channel), CC2, CC3, CC4, T1, T2 or OFF.

Set, change or delete the password. When the password function is added, image 
projection will require to input the preset password when turning on the projector.

Remind the presenter to finish the presentation within a certain time frame.

Use this function to allow the fans operates at full speed continuously to achieve 
proper high altitude cooling of the projector.

Allow you to enter the Lamp Setting menu.

• Lamp Hours: Display the lamp’s elapsed operating time (in hours).

• Lamp Hours Reset: Reset the lamp Hour to 0 hours.

• Eco Mode: Use this function to dim the projector lamp light output which will lower 

power consumption and increase lamp life.

• Dynamic Eco Timer (RC): Sets the timer of triggering Dynamic Eco function. The 

projector lamp will start dimming when the timer period has finished.