Viewsonic VS12617 Manual De Usuario

 

10

 

   

1. 

Plug the power cord into the projector and into a 

wall socket and power adaptor. Plug DC jack to projector. 

Check that the POWER indicator light on the projector 

flashes blue after power has been applied.   

2. 

Remove the lens cap. If it is closed, it could 

become deformed due to the heat produced by the 

projection lamp.   

3. 

Press POWER on the projector or remote control 

to start the projector. The POWER indicator light stays 

blue when the projector is on. The start up procedure 

takes about 20 seconds. In the later stage of start up, a 

startup logo is projected. (If necessary) Rotate the focus 

ring to adjust the image clearness.   

 

 

 

 

 

 

If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message “Signal out 
of range”, please set the computer output to 800X600'   

 
 

 
The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is 

the overview of the OSD menu.   

Important: Use      to highlight function and press Enter to select.

 

Main menu icon