Viewsonic A-CD-PJ502 Guía Del Usuario

When the projector is installed bottom up, please use the accessory filter cover for

 bottom-

up use. It is higher than usual filter cover, to keep the space for intake

 ventilation. Please 

change in the following procedure.

1.After making sure that the projector is adequately cool, carefully turn over the projector 

over so the bottom is facing up.

2.While sliding it in the direction of the arrow and removing, put a finger on the filter cover 

knob.

3.Replace the filter cover for bottom-up use and snap it back into place.
4.Slowly turn up the projector so that the top is facing up.

X

 

Do not replace the filter cover during use or immediately after use. While the

 projector 

is connected to a power supply or is in a high temperature state, handling

 the projector 

could cause electric shock, a fire, a burn and/or malfunction to the

 projector.

Before handling, make sure the power switch is off and the power cord is not plugged

 in, 

then wait at least 45 minutes.

Filter cover's knob

Filter cover's knob

To set

To remove