Viewsonic A-CD-PJ502 Guía Del Usuario

With the INPUT menu, items shown in the table below can be performed.
Select an item using the menu cursor buttons 

S

/

T

, and press the menu

cursor button 

X

 or the ENTER button on the remote control to progress.

Then perform it referring to the following table.

COLOR 

SPACE

Using the buttons 

S

/

T

 switches the mode for color space.

AUTO 

 RGB 

 SMPTE240 

 REC709 

 REC601

       

* This item can be selected only at a RGB input or a component video input.

* The AUTO mode automatically selects the optimum mode.

* The AUTO operation may not work well at some signals. In such a case, it might 

be good to select the SMPTE240 or the REC709.

COMPO-

NENT

Using the buttons 

S

/

T

 switches the function of COMPONENT VIDEO port.

When the SCART RGB is selected, the COMPONENT port function as a port for a 

SCART RGB signal input. A SCART adapter and SCART cable realize a SCART 

RGB input to the projector. For details, ask your dealer.

COMPONENT 

 SCART RGB

VIDEO FOR-

MAT

Using the buttons 

S

/

T

 switches the mode for video format.

AUTO 

 NTSC 

 PAL   SECAM

   

                                        

N-PAL 

 M-PAL 

 NTSC4.43

* This item performs only at a video input from the VIDEO port or the S-VIDEO 

port. For a component video signal, the signal type is identified automatically inde-

pendently of this function.

* The AUTO mode automatically selects the optimum mode.

* The AUTO operation may not work well at some signals. If the picture becomes 

unstable (ex. an irregular picture, a color lack), please select the mode depending 

on the input signal.

FRAME 

LOCK

Using the buttons 

S

/

T

 turns the frame lock function on/off.

TURN ON 

 TURN OFF

* This item performs only at a RGB input with vertical frequency of 48 to 72 --> 50 

to 60 Hz.

* When the TURN ON is selected, a moving picture is displayed more smoothly.

* This function may cause a certain degradation of the picture. In such a case, 

please select the TURN OFF.

INFORMA-

TION

Selecting this item displays a dialog titled “INPUT INFORMATION”. It shows the 

information about the current input.

* The “FRAME LOCK” message on the dialog means the frame lock function is 

working. This function automatically works when a RGB signal with vertical fre-

quency of 50 to 60 Hz is input, and it displays a moving picture more smoothly.

* The “SCART RGB” message means the COMPONENTVIDEO port is working as 

a SCART RGB port. Please refer to the item COMPONENT in this section.