Viewsonic PJ501 Manual De Usuario

Descargar
Página de 32
17
ViewSonic  PJ501/PJ551
OPTION Menu
The OPTION menu has 5 items as shown in the Table 9. 
Please select the item you want to operate with the 
/
 buttons and 
press the 
 button or the ENTER button to start operating. Then you 
can operate according to the following table. 
Table 9: OPTION Menu 
Item
Actions/Description
VOLUME
Adjust Volume:   Loud 
     Quiet 
AUTO OFF
Adjust AUTO OFF Time: 
• Long (MAX. 99 min.)
• Short (Min. 1 min.)
• (DISABLE: 0 min.)
The system automatically enters the standby mode when no signal is received for the set time. 
When the DISABLE (0 min.) is selected this function is inactive.
WHISPER
Select WHISPER Mode: 
NORMAL
 
     
WHISPER 
The WHISPER mode is active when WHISPER is selected. In the WHISPER mode, acoustic 
noise level from the unit is reduced and the brightness level on screen is lowered.
LAMP TIME
Refer to Lamp Time: The starting of this item displays the time that the projector lamp has been 
used.
Reset Lamp Time [Use this function only when the lamp is replaced!] : Keep pressing the 
RESET button for 3 seconds or more during the display of the lamp time. Then the menu for 
reset will appear. When you have replaced the lamp, select the RESET on the menu with the 
 
button.
• Do not reset the lamp time without replacing the lamp. Reset the lamp time always when 
replacing the lamp. The message functions will not operate properly if the lamp time is not 
reset correctly.
• Before replacing the lamp, carefully read the descriptions of "Lamp", "Lamp Life" and 
"Replacing the Lamp".
FILTER TIME
Refer to Filter Time: The starting of this item displays the time that the air-filter has been used.
Reset Filter Time [Use this function only when the filter is replaced!] : Pres the RESET 
button for 3 seconds or more during the display of the filter time. Then the menu for reseting the 
filter time will  display. When you have replaced the filter, select the RESET on the menu with the 
 button.
• Do not reset the filter time without replacing the filter. Reset the filter time always when 
replacing the filter. The message functions will not operate properly if the filter time is not reset 
correctly.
• Before replacing the  air filter, carefully read the descriptions of "Air-Filter" and "Replacing the 
Filter" on page 20.