Viewsonic PJ1172 Manual De Usuario

With the PICTURE-2 menu, the items shown in the table below 

can be performed. Perform each operation in accordance with the 

instruct ions in the table below.

This menu cannot be selected at a M1-D signal.

Item

Description

V POSITION

Adjust the vertical position using the S/T buttons.: 

    Up  Down

This item can be selected only at a RGB signal.

H POSITION

Adjust the horizontal position using the S/T buttons.: 

    Left  Right

This item can be selected only at a RGB signal.

H PHASE

Adjust the horizontal phase to eliminate flicker using the S/T 

buttons.: 

    Right  Left

This item can be selected only at a RGB signal or a component 

video signal other than a COMPONENT port input of 525i/625i/

SCART RGB.

H SIZE

Adjust the horizontal size using the S/T buttons.: 

    Large  Small

This item can be selected only at a RGB signal.

When this adjustment is excessive, the picture may not be 

displayed correctly. In such a case, please reset the adjustment 

pressing the RESET button during this operation.

OVER SCAN

Adjust the over-scan ratio using the S/T buttons.: 

    Large  Small

This item can be selected only at a video signal.

When this adjustment is too large, certain degradation may 

appear at the frame area of the picture. In such a case, please adjust 

small.

RESET

Select EXECUTE using the S button to reset PICTURE-2 menu 

items.: 

    EXECUTE  CANCEL
The items of the PICTURE-2 menu are collectively returned to the 

initial setting. Note that the item “H PHASE” is not reset.