Fisher PDG-DWT50L Manual De Usuario
3. Projecting an Image (Basic Operation)
41
Turning off the Projector
Once the projector is no longer required, it is important to shut it down correctly to avoid damage or unnecessary wear and
tear to the projector.
tear to the projector.
CAUTION
• Do not unplug the power cable from the wall outlet or projector when the projector is powered on.
Doing so can cause damage to the AC IN connector of the projector and (or) the prong plug of the
power cable. To turn off the AC power supply when the projector is powered on, use a power strip
equipped with a switch and a breaker.
power cable. To turn off the AC power supply when the projector is powered on, use a power strip
equipped with a switch and a breaker.
• Do not turn off the AC power supply within 10 seconds of making adjustment or setting changes
and closing the menu. Doing so can cause loss of adjustments and settings and return to default.
Refer to the following guide to shut down the projector.
1.
Press the On/Standby button once. The Power Off
window displays.
window displays.
2.
Press the On/Standby button or Select again on the
OSD control panel or remote control to verify
power off.
The cooling fans continue to operate (cooling-off
time).
The cooling fans stop operating when the projector
turns off.
OSD control panel or remote control to verify
power off.
The cooling fans continue to operate (cooling-off
time).
The cooling fans stop operating when the projector
turns off.
3.
The projector enters Standby mode and the power
LED lights orange.
LED lights orange.
4.
Press the Main Power switch to the off position (O)
to turn off the projector.
to turn off the projector.