Epson EB-S18 Manual De Usuario

Submenu

Function

Sleep Mode

When set to On, this automatically stops projection when no
image signal is being input and no operations are carried out for a
specified length of time. Also, if no image signal is input for
approximately five minutes, the lamp dims until the power turns
off. When an image signal is input, the projector returns to
normal operating status.

Sleep Mode Tim‐
er

When Sleep Mode is set to On, you can set the time before the
projector automatically turns off within a range of 1 to 30
minutes.

Lens Cover Timer

When set to On, this turns off the power automatically 30
minutes after the lens cover is closed. Also, if the lens cover is
closed for approximately five minutes, the lamp dims until the
power turns off. When the lens cover is opened, the projector
returns to normal operating status.

A/V Mute Timer

When set to On, this turns off the power automatically 30
minutes after A/V mute is enabled. Also, if A/V mute is enabled,
the lamp dims until the power turns off. When A/V mute is
disabled, the projector returns to normal operating status.

Standby Mode

When set to Communication On, you can monitor and control
the projector from a computer, even if the projector is in standby
mode.

s

ECO Display

When set to On, when the lamp brightness changes from normal
to low or low to normal, leaf icons are displayed at the bottom-
left of the projected screen to indicate the power-saving status.

Reset

You can reset all adjustment values for the ECO menu to their
default settings. See the following to return all menu items to
their default settings.

s

Lets  you  check  the  status  of  the  image  signals  being  projected  and  the  status
of  the  projector.  Items  that  can  be  displayed  vary  depending  on  the  source
currently  being  projected.  Depending  on  the  model  used,  some  input
sources  are  not  supported.

s

Submenu

Function

Lamp  Hours

You  can  display  the  cumulative  lamp  operating  time

*

1

.

When  the  lamp  replacement  time  is  reached,  the  characters
are  displayed  in  yellow.

Source

You  can  display  the  source  name  for  the  connected
equipment  currently  being  projected.

Input  Signal

You  can  display  the  content  of  Input  Signal  set  in  the
Signal

 menu  according  to  the  source.

Resolution

You  can  display  the  resolution.

Refresh  Rate

You  can  display  the  refresh   rate

.