Garmin CINEMA 200+ Manual De Usuario

To turn off the projector, press the 

Off

 button on the remote control or press the 

Power

 

button on the projector twice. 

Let the projector cool while the Ppower light flashes red (about 30 seconds). Once the light 
stops flashing and stays on, it’s safe to unplug the projector.

Caution: Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce its 
overall life. Never unplug the projector without pressing the Off or Power button and letting it cool, 
or you could damage the projector and reduce lamp life.

The Source buttons let you switch between images output from different pieces of equipment 
connected to the projector (such as a DVD player, cable or satellite box, or video game 
console). 

If you don’t see the image you want, press the 

Source

 button that corresponds to the port to 

which your video source is connected. 

For example:

Note: If you’re projecting in a darkened room, press the 

button (located near the bottom of the 

remote control). This lights up all the keys.

To temporarily turn off the image and darken the screen (without turning off the projector), press 
the Blank button. Press the Blank button again to return to normal viewing.

To select the image source connected to 
the Video port . . . 

. . . press the Video button

PowerLite Cinema 200+.book  Page 18  Thursday, August 18, 2005  2:37 PM