Christie Digital Systems DWX555-GS Manual De Usuario

GS Series User Manual

020-000724-01 Rev. 1 (05-2014)

4-12

• 

Serial Port Echo: Control whether the serial port echoes characters.

• 

Serial Port Path: Select the serial port path from either RS232 or HDBaseT.

• 

Projector Address: Set the projector address (0-9). The projector will 
respond to IR remotes set either at the same address as the projector or to 
IR remotes set to address 0.

Image Blending

Adjust blend widths and settings to left, right, top and/or bottom sides to create 
a seamless multi-projector stitched image. (Available only when optional Dual 
Processor Warp Module is installed.)

What is a Blend?
In simple terms, a blend appears as a gradient strip along an edge of a 
projected image. It is darkest along the extreme edge of the image, and 
lightens nearer to the rest of the image(see below).

How are Blends used?
In multiple-projector wall, complementary blends between neighboring images 
can compensate for the extra "brightness" or intensity where these edges 
overlap. By controlling blend width and other properties, you can achieve 
uniformity across the group of images. "Visible overlaps will disappear, as 
shown below"

Blending regions can be defined on all sides - left, right, top and bottom. The 
same gamma curve is used for all blending regions.