Christie Digital Systems DHD675-E Manual De Usuario
E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Section 1: Safety
1-2
Always power down the projector and disconnect all power sources before
y
servicing or cleaning.
Use a soft cloth moistened with a mild detergent to clean the display
Use a soft cloth moistened with a mild detergent to clean the display
y
housing.
Disconnect the power plug from the AC outlet if the product is not being
Disconnect the power plug from the AC outlet if the product is not being
y
used for an extended period of time.
Operate the projector under the following conditions:
Operate the projector under the following conditions:
y
Operating temperature range: 5°C to 35°C
-
Storage temperature range: -10°C to 60°C
-
Humidity range: 5% to 80 % RH (Max.), non condensing
-
Operating altitude: 10,000 ft. maximum
-
Use only the AC power cord supplied. Do not attempt operation if the AC
y
supply and cord are not within the specified voltage and power range for
your region.
Remove the lens plug from the lens opening in the projector before
Remove the lens plug from the lens opening in the projector before
y
installing the lens. Retain the lens plug to protect the optical components
from dust and debris during transport.
Do not block the ventilation slots and openings on the projector.
Do not block the ventilation slots and openings on the projector.
y
Do not use abrasive cleaners, waxes or solvents to clean the projector.
y
Do not allow anything to rest on the power cord.
y