Christie Digital Systems 103-012100-01 Manual De Usuario

Openings in the cabinet are provided for ventilation. 

To ensure reliable operation of the product and to 

protect it from overheating, these openings must not 

be blocked or covered. 

 

Hot air is exhausted from the exhaust vent. When 

using or installing the projector, the following 

precautions should be taken. 

– Do not put any flammable object or spray can near 

the projector, hot air is exhausted from the air 

vents.

– Keep the exhaust vent at least 3’ (1 m) away from 

any objects.

– Do not touch peripheral parts of the exhaust vent, 

especially screws and metallic parts. These areas 

will become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on 

the cabinet will not only get damaged but also may 

cause fire hazard by heat.

Cooling fans are provided to cool down the projector. 

The fans’ running speed is changed according to the 

temperature inside the projector.

Exhaust Vent
(Hot air exhaust)

Air Intake Vent

Air flow

The projector uses a lamp which generates 

significant heat. The cooling fans and air vents are 

provided to dissipate the heat by drawing air into the 

housing and the filter is located in the intake vents to 

prevent dust from getting inside of the projector.

In order to care for the projector appropriately, 

regular cleaning is required. Remove any dirt or dust 

that has accumulated on the projector.

If the projector reaches a time set in the timer 

setting, a Filter replacement icon (Fig. 1) appears on 

the screen and WARNING FILTER indicator on the 

top panel lights up (see below), indicating that the 

filter replacement is necessary.

If the projector detects that the filter is clogged and 

no scroll is left in the filter cartridge, a Filter cartridge 

replacement icon (Fig. 2) appears on the screen and 

WARNING FILTER indicator on the top panel lights 

up (see below). Stop using the projector immediately 

and replace the filter cartridge.

Blocking the air vents and leaving the projector 

uncleaned for a long time may not only damage the 

projector and may require costly repairs but may also 

cause accidents or fire.

For maintenance of the filter, refer to “Filter counter” 

on page 55 and “Maintenance and Care” on pages 

56–58.

Fig .1   Filter replacement icon

Fig .2    Filter cartridge replacement 

icon