Crestron electronic CP-X3014WN/ Manual De Usuario

7.2 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the
projector information, which is a failure or warning status, from the computer on
the network. The SNMP management software will be required on the computer
to use this function.

• It is recommended that SNMP functions be carried out by a network

administrator.
• SNMP management software must be installed on the computer to monitor
the projector via SNMP.

• To use the downloaded MIB ﬁle, specify the ﬁle by your SNMP

manager.

NOTE

SNMP Settings (

22)

Conﬁgure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter “http://192.168.1.10/” into the address bar of the web browser, and

select Projector Web Control from the selection window.

2) Enter your user name and password, and then click the [OK].
3) Click the [Port Settings] on the main menu.
4) Click the [Download MIB ﬁle] to download a MIB ﬁle.

5) Click the [Enable] check box to open the SNMP Port. Set the IP address to

send the SNMP trap to when a Failure/Warning occurs.

6) Click the [Security Settings] on the main menu.
7) Click the [SNMP] and set the community name on the screen that is displayed.

8) Conﬁgure the settings for Trap transmission of Failures/Warnings. Click the

[Alert Settings] on the main menu and select the Failure/Warning item to be
conﬁgured.

9) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings.

Clear the [Enable] check box when SNMP trap transmission is not required.

10) Click the [Apply] button to save the settings.

7. Other Functions

• A Network Restart is required after the Community name has been

changed. Click the [Network Restart] and conﬁgure the following items.

NOTE

• A Network Restart is required after the SNMP Port conﬁguration

settings have been changed. Click the [Network Restart] and conﬁgure the
following items.

NOTE