Crestron electronic CP-X3014WN/ Manual De Usuario
64
Command Format
Command formats differ among the different communication ports.
● TCP #23
● TCP #23
You can use the RS-232C commands without any changes. The reply data
format is the same as the RS-232C commands. (
format is the same as the RS-232C commands. (
RS-232C Communication
in the Operating Guide - Technical)
However, the following reply will be sent back in the event of authentication
failure when authentication is enabled.
However, the following reply will be sent back in the event of authentication
failure when authentication is enabled.
Header
Data length
RS-232Ccommand
Check Sum
Connection
ID
0x02
0x0D
13 bytes
1 byte
1 byte
Reply
Error code
0x1F
0x04
0x00
<Reply in the event of an authentication error>
Header →
0x02,
Fixed
Data length
→ RS-232C commands byte length (0x0D, Fixed)
RS-232C command → RS-232C commands that start with 0xBE 0xEF
(13 bytes)
Check Sum
→ This is the value to make zero on the addition of the
lower 8 bits from the header to the checksum.
Connection ID
→ Random value from 0 to 255 (This value is attached
to the reply data)
● TCP #9715
Send Data format
The following formatting is added to the header (0 x 02), Data length (0 x 0D),
Checksum (1 byte) and Connection ID (1 byte) of the RS-232C commands.
The following formatting is added to the header (0 x 02), Data length (0 x 0D),
Checksum (1 byte) and Connection ID (1 byte) of the RS-232C commands.
7. Other Functions
7.4 Command Control via the Network (continued)