A&D AD-4212B-101/102/201/301 Manual De Usuario

 

96

Stable value 

The weight data when the stabilization indicator appears. 

Environment 

Ambient conditions such as vibration, drafts, temperature, static electricity or 
magnetic fields which affect the weighing operation. 

Store 

To save the weighing data, unit mass, calibration data or upper/lower limit values 
using the data memory function. 

Calibration 

Adjustment of the balance so that it can weigh accurately. 

Output 

To output the weighing data using the RS-232C interface. 

Zero point 

A weighing reference point or the zero display. Usually refers to the value 
displayed when nothing is on the weighing pan. 

Data number 

Numbers assigned sequentially when weighing data or unit weight is stored. 

Digit 

Unit of digital resolution. Used for the balance, the minimum displayable weighing value 

Tare 

To cancel the weight of a container which is not included in the weighing data. 

Mode 

Balance operational function. 

Re-zero 

To set the display to zero. 

GLP 

Good Laboratory Practice. 

Repeatability 

Variation in measured values obtained when the same weight is placed and 
removed repetitively. Usually expressed as a standard deviation. 

 

e.g. Standard deviation=1 digit: This means that measured values fall within 

±1 

digit in the frequency of about 68%. 

Stabilization time Time required after a sample being placed, until the stabilization indicator 

illuminates and the weighing data is displayed. 

Sensitivity drift  An affect that a change in temperature causes to the weighing data. Expressed as 

temperature coefficient. 

 e.g. 

Temperature 

coefficient = 2 ppm/

°C : If a load is 100 g and the temperature 

changes by 10

°C, the value displayed changes by the following value. 

 0.0002%/

°C x 10°C x 100 g = 2 mg 

 

Carriage return ..................................... 39 
Line feed ............................................. 39 
Space mark .......................................... 39 

Comparator indicators................ 14 
Weighing speed indicators ......... 14 
Interval memory active indicator ........ 14 

 

Interval memory standby indicator...... 14 

 

Processing indicator................... 14 
Stabilization indicator ................. 14 
Standby indicator ....................... 14 

CAL key ............................................ 14 
MODE key ........................................ 14 

ON/OFF key......................................14 
PRINT key.........................................14 
RE-ZERO key ...................................14 
SAMPLE key.....................................14 

100% reference mass..................................52 
 

 

A&D standard format ...................................36 
AC adapter ...................... 9, 10, 13, 34, 41, 83 
ACAI .......................................................51 
Acknowledge code.......................................69 
AD-1683  DC static eliminator .............. 11, 94 
AD-1684  Electrostatic field meter..............94