Pitney Bowes B702 Manual De Usuario

3.  To select an ad, press the Ad key repeatedly until you 

see the ad name you want. Press Enter to confirm your 
selection. The meter's display then shows the postal 
amount.

 

When the meter is in the Ad Mode, you can also choose 
an ad by typing its number on the meter's keypad 
and pressing Enter. If an ad isn't available, the meter 
prompts “No Ad.” 

NOTE:  Ads are not available for use if you remove the slo-
gan cartridge from its well

The moistener is an option designed to moisten and help 
seal envelopes as they feed into the postage meter. The in-
structions below tell you how to attach, fill, use and maintain 
your moistener.

1.  Place the moist-

ener assembly 
to the left of the 
meter as shown at 
the right. 

2.  Slide the moisten-

er to the right up 
against the meter. 
Align the pie-
shaped back wall 
of the moistener 
with the smaller 
pie-shaped wall of 
the meter. These 
areas are shaded 
in the accompanying figure. 

3.  When the blue lock lever snaps up level with the meter 

deck, the moistener is fully locked into position.