Citizen CBM-270 Manual De Usuario
CBM-270 User’s Manual
CITIZEN
41
7777....3333....4444
D
D
D
Daaaatttta
a
a
a R
R
R
Reeeecccceeeeiiiivvvviiiinnnng
g
g
g C
C
C
Coooonnnnttttrrrroooollll
If DTR/DSR control has been selected, the data from the host side will be received when the
BUSY signal is at "Low," but not received when at "High." If DTR/DSR has not been
selected, the data from the host side will be received after sending XON, but not after sending
XOFF.
BUSY signal is at "Low," but not received when at "High." If DTR/DSR has not been
selected, the data from the host side will be received after sending XON, but not after sending
XOFF.
7777....3333....5555
B
B
B
Buuuuffffffffeeeerrrriiiinnnngggg
To transfer the data to the input buffer, there are two control signals available: DTR signal
and TXD signal. The host side is immediately freed, since the data can be buffered up to 2
KB.
To transfer the data to the input buffer, there are two control signals available: DTR signal
and TXD signal. The host side is immediately freed, since the data can be buffered up to 2
KB.
(1) DTR signal (See 7.3.1-(2))
(2) TXD signal (See 7.3.1-(3))
(2) TXD signal (See 7.3.1-(3))
7777....3333....6666
E
E
E
Elllleeeeccccttttrrrriiiiccccaaaal l l l C
C
C
Chhhhaaaarrrraaaacccctttteeeerrrriiiissssttttiiiiccccssss
RS-232C Circuit
Input (RXD, DSR)
[Printer Side] [Host Side]
Output (TXD, DTR)
[Printer Side]
[Host Side]
Equivalent to MAX232
Mark=(-8V): At Busy
Mark=(-8V): 1
Space=(+8V): At Busy
Space=(+8V): 0
Equivalent MAX232
RXD
Mark=(-8V): Stop bit
Space=(+8V): Start bit
Space=(+8V): Start bit
TXD
DTR