Citizen CMP-10 Manual De Usuario
— 62 —
BLACK MARK FUNCTION
ESC l n
[Function]
Specify/canceling black mark function
[Code]
<1B>H<6C>H<n>
[Range]
n = 0 or 1
[Outline]
Specifying / canceling the black mark function.
[Caution]
Black mark function uses PE sensor of CMP-10 for black mark sensor. Therefore, the
condition of detecting paper end and detecting open cover is changed in this mode.
condition of detecting paper end and detecting open cover is changed in this mode.
[Default]
n = 0
[See also]
FF Note on Next page
FF
[Function]
Printing and paper feeding to the black mark position
[Code]
<0C>H
[Outline]
This command prints the data in the printer buffer and searches for black mark. It is
ignored if black mark function is not specified.
ignored if black mark function is not specified.
[Caution]
This command is valid only when black mark function is specified.
[See also]
ESC l n Note on next page
n (Hex)
Type
0
Canceling black mark function
1
Specifying black mark function