Citizen CLP-7001 Manual De Usuario
Chapter 5
TroubleShooting
53
2
Power Troubleshooting
Problem
Cause and remedy
No power even
with power switch
turned ON.
with power switch
turned ON.
• Power cord is not
properly connected to the
outlet.
outlet.
• Power cord is not
properly connected to the
power inlet.
power inlet.
• Input voltage is not
correct; input voltage is
greater or less than the
rated voltage.
greater or less than the
rated voltage.
• Correct RS-232C cable is
not used.
→
Turn off the power switch and
reconnect the power cord to the
outlet properly.
reconnect the power cord to the
outlet properly.
→
Turn off the power switch and
reconnect the power cord to the
power inlet properly.
reconnect the power cord to the
power inlet properly.
→
Set input voltage within the rated
voltage (puncture voltage may
occur.
voltage (puncture voltage may
occur.
Contact our service
personnel).
→
Turn off the power switch and
unplug the interface cable.
unplug the interface cable.
Check
that power is provided by turning on
the power switch and use the correct
RS-232C cable.
the power switch and use the correct
RS-232C cable.