Citizen iDP3310 Manual De Usuario
iDP3310 User's Manual
31
CITIZEN
8. DRAWER KICK-OUT CONNECTOR AND POWER CONNECTOR
8.1 Specifications of Drawer Kick-Out Connector(Option)
(1) Drawer kick-out drive signal
The pulses specified by the BELL command(07h) are output.(Approx. 200 ms)
(2) Electrical characteristics
1) Drive voltage: 12V DC
+
/
−
1V
2) Drive current: 0.8 A at maximum
8.1.1 Connector’s Pin Configuration
No.
Signal
Function
1
FG
Frame Ground
2
DRAWER 1
Drawer drive signal
3
- -
4
VDR
Drawer drive power
5
- -
6
- -
Connector used
: TM5RJ3-66(HIROSE) or equivalent
Applicable connector
: TM3P-66P(HIROSE) or equivalent
CAUTION
:
•
No output is made while printing.
•
A solenoid used for the drawer should be of 15
Ω
or more. An output current should
be kept below 0.8 A. Otherwise, there is a danger of trouble or burnout.
•
This connector cannot be connected to a telephone line. Do not connect other than the
solenoid.
solenoid.
8.1.2 Drive Circuit
[Printer Side]