Citizen IF1-ET01 Manual De Usuario

23

The IP address that is used to connect the printer to the network can be automatically obtained by 
the DHCP server or It can be  manually set. When it leaves the factory, the device is programmed 
to have the DHCP server automatically obtain the IP address. To change the IP address, enter it 
manually.

  IP address when connecting to the network for the first time

After the printer is turned on, the device will automatically obtain the IP address from the DHCP 
server within 60 seconds. If the IP address cannot be obtained automatically, the static IP address 
(169.254.1.10, set in this device at the factory) will be applied.

  Setting IP address manually

1)  Using your Web browser, access the print server homepage. See 5, Using the Print Server 

Homepage (p.16) for how to access the homepage.

2)  Open the “Print server configuration” page and click “Edit.”
3)  Click “Disable” for “IP address from DHCP” under “TCP/IP settings.” The automatic obtaining 

of the IP address by the DHCP server will be disabled.

4)  Enter the IP address in “IP address” under “TCP/IP settings.”
5)  Click “Register” to save the change.

  Setting the IP address automatically

1)  Using your Web browser, access the print server homepage. See 5, Using the Print Server 

Homepage (p.16) for how to access the homepage.

2)  Open the “Print server configuration” page and click “Edit.”
3)  Click “Enable” for “IP address from DHCP” under “TCP/IP settings”. 

The automatic obtaining of the IP address by the DHCP server will be enabled.

4)  Click “Register” to save the change. 

The “Please wait” page will appear and the change will be saved.

5)  Turn on the printer. 

After the printer is turned on, the device will automatically obtain the IP address from the 
DHCP server within 60 seconds.

  Checking the IP address

To check, print the settings information. See 6-1, Printing Print Server Configuration (p.22) for 
details.