Compaq 5525B Manual De Usuario
Chapter 4
EMULATION
110
NOTE: Data bit 8 is interpreted as either data bit 8 or PI signal, but
never both. When enabled as data bit 8, data bit 8 has priority
over the PI signal, and all data above hex 7F is used to access
character data and not to interpret PI line data.
over the PI signal, and all data above hex 7F is used to access
character data and not to interpret PI line data.
Conversely, when data bit 8 is disabled and the PI signal is
used, data bit 8 of the data is reserved for use as the PI
function, and you cannot access characters in the hex 80-FF
range. Therefore, to access characters in the hex 80-FF range,
data bit 8 must be enabled.
used, data bit 8 of the data is reserved for use as the PI
function, and you cannot access characters in the hex 80-FF
range. Therefore, to access characters in the hex 80-FF range,
data bit 8 must be enabled.
ISO Char Set
This parameter allows you to select a font for the Code V feature. The
default is 0, which is U.S. ASCII. The following values are valid choices:
default is 0, which is U.S. ASCII. The following values are valid choices:
0
U.S. ASCII
1
United Kingdom
2
Swedish/Finnish
3
Norwegian/Danish
4
Japanese
5
German
6
French
7
Italian
8
Spanish
9
PC Subset
10
Code V Version I
Values 11-23 are undefined and will default to 0. You can set values 24-
32 to specific fonts; refer to the User Set command in the
32 to specific fonts; refer to the User Set command in the
IGP/VGL
Programmer’s Reference Guide.
PI Control
Printer PI
•
Disable. The ASCII emulation is configured with the PI line
disabled.
disabled.
•
Enable. The ASCII emulation is configured with the PI line enabled.