Citizen Systems CT-S4000 Manual De Usuario

— 24 —

● Black Mark detection error (in Black Mark mode)

When Black Mark cannot be detected even if a certain amount of paper feed
is carried out for Black mark detection, a Black Mark detection error occurs.  If
black detection continues more than the specified period, a No Paper condition
is assumed and the same error as No Paper is indicated.

Lighting and blinking status of each error including the above is shown below.

Paper-end

Lights

Lights

Paper near-end

Lights

Lights

Printer cover open

Lights

Lights

Printer cover open

Lights

error *1

Cutter lock error

Lights

Head overheat error

Lights

Motor overheat error

Lights

Memory check error

Lights

Low voltage error

Lights

High voltage error

Lights

Macro execution

Lights

wait *2

Black Mark detection

Lights

error

*1: When the printer is printing.
*2: The ERROR LED may blink even in the execution of macro function.

If the cutter blade remains protruded due to paper jam or for any abnormality,
opening the paper cover may be disabled.  In this case, do not open the paper
cover forcibly.  Insert a Phillips screwdriver (size #1) into the cutter lock releasing
feed hole and turn it in the direction of arrow (clockwise).

When you find that both ends
of the blade reached the lowest
p o s i t i o n ,   s t o p   t u r n i n g   t h e
screwdriver.  Open the cover
and follow the procedure of
removing jam or other cause of
trouble.

Cutter lock
releasing feed hole

Phillips screwdriver