Citizen Systems iDP-3551 Manual De Usuario

1. Use both hands to hold the projections on each side of the printer cover and lift the printer cover in the

direction shown by the arrow to detach it.

2. When attaching the printer cover, place the hooked part at the front in the appropriate part of the printer

and lower the printer cover.

1. Turn off the power. (Mating side included)
2. Check the top and bottom of the cable terminals, and connect to the interface connector.
3. Secure the cable terminals.

Serial interface

: Tighten screws to secure.

Parallel interface

: Turn clamps to secure.

4. Connect the interface cable to the computer.

Serial Interface Connector

Parallel Interface Cable

Parallel Interface Connector

Clamp

Serial Interface Cable

Projection