Citizen Systems BD2-2220 Manual De Usuario

 

- 75 - 

 

 

Setting line feed rate of minimum pitch

 

 

[Code] 

<

1B>H<33>H<n> 

 

[Range] 

0≦n≦255 

 

 

 

Sets the line feed width per line to [n×basic calculation pitch] inches.

 

 

 

• The line feed width can be set separately for the STANDARD and PAGE MODES.

 

• The basic calculation pitch is set by GS P. Once defined, the line feed width is not changed if the 

basic calculation pitch is changed by GS P.

 

• Fractions resulting from calculation are corrected with the minimum pitch of the mechanism, and 

the remainder is omitted.

 

• In STANDARD MODE, this command uses the vertical (paper feed direction) basic calculation pitch 

(y). 

• In PAGE MODE, this command acts differently depending on the start point: 

(1) If the start point specified by ESC T is top left or bottom right, the command uses the vertical 

(paper feed direction) basic calculation pitch (y). 

(2) If the start point specified by ESC T is top right or bottom left, the command uses the 

horizontal (perpendicular to the paper feed direction) basic calculation pitch (x). 

• The maximum settable line feed width is 1016 mm (40 inches). A setting greater than this 

maximum is trimmed to the maximum. 

 

 

/

/

/

/

 

Approx. 4.23mm 

 

/

(1) When memory switch 5-2 is OFF: 

Approx. 4.23mm 

(2) When memory switch 5-2 is ON: 

Approx. 3.75 mm