Xerox WC PE120 Series Manual De Usuario

Specifications

E.10

• Size: You should only use envelopes within the following size ranges.

:

• Use only the manual feeder to print envelopes.
• You may experience some paper jams when using any media with a length less than 

140 mm 

(5.5 in.). This may be caused by paper that has been affected by 

environmental conditions. For optimum performance, make sure you are storing and 

handling the paper correctly. Please refer to “Paper Storage Environment” on page E.8.

Double side-seams construction has vertical seams at both ends of the envelope 

rather than diagonal seams. This style may be more likely to wrinkle. Be sure the 

seam extends all the way to the corner of the envelope as illustrated below.

Envelopes with a peel-off adhesive strip or with more than one flap that folds over to 

seal must use adhesives compatible with the heat and pressure in the machine. The 

extra flaps and strips might cause wrinkling, creasing or even jams and may even 

damage the fuser.

The following gives typical address margins for a commercial #10 or DL envelope.

Bypass tray

76 x 127 mm

(3 x 5 in.)

216 x 356 mm

(8.5 x 14 in.)

Return address

15 mm (0.6 in.)

51 mm (2 in.)

Delivery address

51 mm (2 in.)

90 mm (3.5 in.)

Correct

Incorrect