Cino MP3200 Manual De Usuario
Command Descriptions
Programming Reference
VERSAJET MP3200
ESC SP
[Name]
Set right-side character spacing
[Format] ASCII
ESC SP n
Hex
1B 20 n
Decimal
27 32 n
[Range] 0
ЉnЉ255
[Default]
n = 0
[Description]
Sets the right-side character spacing to nx (horizontal or vertical motion unit).
[Notes]
The character spacing set by this command is effective for alphanumeric and
user-defined character.
user-defined character.
When characters are enlarged, the character spacing is n times normal value. The
character spacing for double-width mode is twice the normal value.
character spacing for double-width mode is twice the normal value.
When standard mode is selected, the horizontal motion unit is used.
When page mode is selected, the vertical or horizontal motion unit is used for the print
direction set by ESC T.
direction set by ESC T.
When the starting position is set to the upper left or lower right of the printing area
using ESC T, the horizontal motion unit is used.
using ESC T, the horizontal motion unit is used.
When the starting position is set to the upper right or lower left of the printing area
using ESC T, the vertical motion unit is used.
using ESC T, the vertical motion unit is used.
Settings of this command are effective until ESC @ is executed, the printer is reset, or the
printer is turned off.
printer is turned off.
It is used to change the spacing between characters.
35
Preliminary Rev. 02