SATO M8460S Manual De Usuario
![SATO](https://files.manualsbrain.com/attachments/7126289acbb64f9d9751e2c4ecbd6b84d3016d0e/common/fit/150/50/1867008f666afbd730f0b362615cd0a2f63834a58962b9c4e667d51beaa3/brand_logo.jpeg)
Programming Manual
2. Command Codes
SATO RISC Printers
57
Job ID Store
Command Structure:
<ESC>IDaa
aa:
aa:
Job ID assigned (01 to 99)
Example:
<ESC>ID09
Placement:
Immediately following the <ESC>A in the job data
stream.
stream.
Default:
None
Function:
To add an identification number to a job. The status of the job can then
be determined using the ENQ command in the Bi-Com status mode
(See Interface Specifications for more information).
be determined using the ENQ command in the Bi-Com status mode
(See Interface Specifications for more information).
Input:
<ESC>A
<ESC>ID02
. . . Job . . .
<ESC>Z
Output:
There is no printer output as a result of this command.
Note:
1. Works only in Bi-Com mode. The Job ID number must be stored
1. Works only in Bi-Com mode. The Job ID number must be stored
before Bi-Com status mode can be used.
2. If more than one ID number is sent in a single job, the last number
transmitted will be used, i.e.
<ESC>A
<ESC>ID01
. . . . . . . . . .
<ESC>ID02
. . . . . . . . .