Epson M X - 8 0 Manual De Usuario

The separator of the Printer contributes to smooth paper feeding. Set the separator

by inserting its edge into the two holes located at the rear part of the frame of the

printer mechanism. (See Fig. 11.)

Fig. 11 Separator Installation

6.1. Loading of fanfold paper

The MX-80 Type II Printer accommodates fanfold paper from 4” to 10” in width.

To load the fanfold paper, observe the following procedure.

STEP 1.

Raise the printer lid.

STEP 2.

Turn the scale toward the front of the Printer and detach it from the

platen.

STEP 3.

Confirm that the paper guide roller is at the center of the sprocket shaft.

If not, set it at the center of the shaft.

STEP 4.

Raise the two paper holding covers, and be sure to insert the fanfold

paper between the frame and plastic roller of the separator. (See Fig. 12.)

- 1 0 -