Epson 2190 Manual De Usuario
EPSON FX-890/FX-2190
18 - EPSON FX-890/FX-2190
6/03
Cleaning the Printer
1. Remove any paper loaded in the printer and turn it off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Remove the paper guide. If a pull tractor or an optional
cut-sheet feeder is installed, remove it.
4. Use a soft brush to carefully brush away all dust and dirt
from the outer case and paper guide.
5. If the outer case or paper guide is still dirty, clean it with a
soft, clean cloth dampened with mild detergent dissolved in
water. Keep the printer cover closed to prevent water from
getting inside the printer.
water. Keep the printer cover closed to prevent water from
getting inside the printer.
Caution: Never use alcohols or thinners to clean the printer; these
chemicals can damage the printer components as well as the case.
chemicals can damage the printer components as well as the case.
Be careful not to get water on the printer mechanism or electronic
components.
components.
Do not use a hard or abrasive brush.
Do not spray lubricants inside the printer; unsuitable oils can damage
the printer mechanism. Contact an EPSON dealer if you think
lubrication is needed.
the printer mechanism. Contact an EPSON dealer if you think
lubrication is needed.
Transporting the Printer
If you need to transport your printer some distance, carefully
repack it using the original box and packing materials, as
described below.
repack it using the original box and packing materials, as
described below.
Warning: You need to move the print head by hand to remove the
ribbon cartridge. If you have just used the printer, the print head
may be hot; let it cool for a few minutes before touching it.
ribbon cartridge. If you have just used the printer, the print head
may be hot; let it cool for a few minutes before touching it.
1. Remove any paper in the printer and turn it off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Remove the paper guide.
4. If any options are installed, remove them and pack them in
their original boxes.
5. Make sure the print head is not hot. Then remove the
ribbon cartridge.
6. Make sure the paper tension unit is installed and the tractor
is installed in the rear push position. Also make sure the
printer cover and front cover are closed.
printer cover and front cover are closed.
7. Repack the printer, paper guide, ribbon cartridge, and
power cord in the original packing materials and place them
in the printer’s original box.
in the printer’s original box.
Related Documentation
4041363-00/
CPD-15991R1
CPD-15991R1
EPSON FX-890/2190 User’s Guide
3020817-00/
CPD-16124
CPD-16124
CD-ROM containing online Reference
Guide
Guide
PLFX890
EPSON FX-890 Parts Price List
PLFX2190
EPSON FX-2190 Parts Price List