Samsung ML-3712DW/XAA Manual De Usuario

From the computer, we recommend using a USB cable with the 
program provided in the supplied software CD. 

•

With a USB cable: You can simply set up a wireless network 
using the program on the supplied software CD. Only Windows 
and Macintosh operating systems are supported (see "Setup 
using Windows" on page 34 or "Setup using Macintosh" on page 
42).

 

You can also install a wireless network in Printer Settings 
Utility with a USB cable after installing the driver (Windows 
and Macintosh operating systems are supported).

 

•

With a network cable: You can set up a wireless network using 
the SyncThru™ Web Service program (see "Using a network 
cable" on page 48).

15 

If your machine and an access point (or wireless router) support Wi-
Fi Protected Setup™ (WPS), you can easily configure the wireless 
network settings by pressing the 

 (WPS) button on the control 

panel without a computer.

 

If you want to use the wireless network using the 
infrastructure mode, make sure that the network cable is 
disconnected from the machine. Using the WPS (PBC) 
button or entering the PIN from the computer to connect to 
the access point (or wireless router) varies depending on the 
access point (or wireless router) you are using. Refer to the 
user's guide of the access point (or wireless router) you are 
using.

 

•

Check if the access point (or wireless router) supports Wi-Fi 
Protected Setup™ (WPS).

•

Check if your machine supports Wi-Fi Protected Setup™ (WPS).

•

Networked computer (PIN mode only)