Samsung ML-3712DW/XAA Manual De Usuario
Wireless network setup
33
2. Using a network-connected machine
4
According to the network you selected, the WLAN security
encryption type will be WEP or WPA.
encryption type will be WEP or WPA.
•
In case of WEP, press the Open System or SharedKey.
-
Open System: Authentication is not used, and
Encryption may or may not be used, depending on the
need for data security. Enter the WEP Key after
selecting Open System.
Encryption may or may not be used, depending on the
need for data security. Enter the WEP Key after
selecting Open System.
-
SharedKey: Authentication is used. A device that has
a proper WEP Key can access the network. Enter the
WEP Key after selecting SharedKey.
a proper WEP Key can access the network. Enter the
WEP Key after selecting SharedKey.
•
In case of WPA, enter the WPA Key. The key length should
be between 8 and 63 characters long.
be between 8 and 63 characters long.
5
Press OK.
Custom mode
1
Enter the SSID when Edit SSID appears on the top line of the
display, the name that identifies a wireless network. SSID is
case-sensitive so you need to enter it carefully. Press OK.
display, the name that identifies a wireless network. SSID is
case-sensitive so you need to enter it carefully. Press OK.
2
Select the type of wireless connections.
3
Press OK to select the method of Operation Mode.
•
Ad-hoc: Allows wireless devices to communicate directly
with each other in a peer-to-peer environment. Go to step
4.
with each other in a peer-to-peer environment. Go to step
4.
•
Infrastructure: Allows wireless devices to communicate
with each other through an access point. Go to step 5.
with each other through an access point. Go to step 5.
4
Press OK to select the method of Channel.
If you select Auto, the wireless network interface card on your
machine will automatically adjust the channels.
machine will automatically adjust the channels.
5
Press OK to select the method of WLAN Security.
•
None: This is used when the validation of a wireless
device’s identity and data encryption are not required for
your network. Open system is used for IEEE 802.11
authentication.
device’s identity and data encryption are not required for
your network. Open system is used for IEEE 802.11
authentication.
•
Static WEP: This uses the WEP (Wired Equivalent Privacy)
algorithm suggested by IEEE 802.11 standard for security.
Static WEP security mode requires a proper WEP key for
data encryption, decryption, and IEEE 802.11
authentication. Press OK to select the setup method in
Authentication
algorithm suggested by IEEE 802.11 standard for security.
Static WEP security mode requires a proper WEP key for
data encryption, decryption, and IEEE 802.11
authentication. Press OK to select the setup method in
Authentication
-
Open System: Authentication is not used, and
encryption may or may not be used, depending on the
need for data security. Enter the WEP Key.
encryption may or may not be used, depending on the
need for data security. Enter the WEP Key.