Samsung ML-3712DW/XAA Manual De Usuario

The window shows the wireless network settings and checks 
if the settings are correct. Click Next.

•

For the DHCP method

If the IP address assignment method is DHCP, check if 
DHCP is shown in the window. If it shows Static, click 
Change TCP/IP to change the assignment method to 
DHCP.

•

For the Static method

If the IP address assignment method is Static, check if 
Static is shown in the window. If it shows DHCP, click 
Change TCP/IP to enter the IP address and other network 
configuration values for the machine. Before entering the 
IP address for the machine, you must know the computer’s 
network configuration information. If the computer is set 
to DHCP, you must contact the network administrator to 
get the static IP address.

For example:

If the computer’s network information is as shown below:

-

IP address: 169.254.133.42

-

Subnet Mask: 255.255.0.0

Then, the machine’s network information should be as 
follows:

-

IP address: 169.254.133.43 

-

Subnet Mask: 255.255.0.0 (Use the computer’s subnet 
mask.)

-

Gateway: 169.254.133.1

When the wireless network setting is completed, disconnect 
the USB cable between the computer and machine. Click 
Next.

The Wireless Network Setting Complete window appears.

Select Yes if you accept the current settings and continue the 
setup procedure.

Select No if you want to return to the beginning screen. 

Then, click Next.

Click Next when the Confirm Printer Connection window 
appears.

Select the components to be installed. Click Next.

After selecting the components, you can also change the 
machine name, set the machine to be shared on the network, 
set the machine as the default machine, and change the port 
name of each machine. Click Next.