Samsung ML-3712DW/XAA Manual De Usuario

The wireless network security window appears when the 
access point has security setting.

The wireless network security window appears. The window 
may differ according to its security mode: WEP or WPA.

• WEP

Select Open System or Shared Key for the authentication 
and enter the WEP security key. Click Next.
WEP (Wired Equivalent Privacy) is a security protocol 
preventing unauthorized access to your wireless network. 
WEP encrypts the data portion of each packet exchanged 
on a wireless network using a 64-bit or 128-bit WEP 
encryption key.

• WPA

Enter the WPA shared key and click Next.
WPA authorizes and identifies users based on a secret key 
that changes automatically at regular intervals. WPA also 
uses TKIP (Temporal Key Integrity Protocol) and AES 
(Advanced Encryption Standard) for data encryption.

 

The window shows the wireless network settings and check if 
settings are right. Click Next.

•

If the IP address assignment method is DHCP, check if 
DHCP is shown in the window. If it shows Static, click 
Change TCP/IP to change the assignment method to 
DHCP.

•

If the IP address assignment method is Static, check if 
Static is shown in the window. If it shows DHCP, click 
Change TCP/IP to enter the IP address and other network 
configuration values for the machine. Before entering the 
IP address for the machine, you must know the computer’s 
network configuration information. If the computer is set 
to DHCP, you must contact the network administrator to 
get the static IP address.

For example:

If the computer’s network information is as shown follows:

-

IP address: 169.254.133.42

-

Subnet Mask: 255.255.0.0

Then, the machine’s network information should be as 
follows:

-

IP address: 169.254.133.43