Samsung ML-186XW Manual De Usuario

Getting started_ 22

2.

getting started

This chapter gives you step-by-step instructions for setting up the USB connected machine and software.

•

•

•

•

  

This section shows the steps to set up the hardware, as is explained in the 

Quick Install Guide. Make sure you read the Quick Install Guide first and 

follow the steps below:

1. Select a stable location.

Select a level, stable place with adequate space for air circulation. Allow 

extra space for opening cover(s) and tray(s). 
The area should be well ventilated and away from direct sunlight or 

sources of heat, cold, and humidity. Do not set the machine close to the 

edge of your desk or table.

Printing is suitable for altitudes under 1,000 m (3,281 ft). 
Place the machine on a flat, stable surface so that there is no incline 

greater than 2 mm (0.08 inch). Otherwise, printing quality may be 

affected.

2. Unpack the machine and check all the enclosed items.
3. Remove tape holding the machine securely.
4. Install the toner cartridge.
5. Load paper. (See "Loading paper in the tray" on page 37.)
6. Make sure that all cables are connected to the machine. 
7. Turn the machine on. (See "Turning on the machine" on page 21.)

This machine will not operate when the power main fails.

•

Printer driver:  Use this driver to take full advantage of 

your machine’s features.

•

Smart Panel:  This program allows you to monitor the 

machine’s status and alerts you when an error occurs 

during printing.

•

Printer Settings Utility:  This program allows you to set 

up printer’s other options from your computer.

•

Printer Driver:  Use this driver to take full advantage of 

your machine’s features.

•

Smart Panel:  This program allows you to monitor the 

machine’s status.

•

Printer Settings Utility:  This program allows you to set 

up printer’s other options from your computer.

•

Unified Linux Driver:  Use this driver to take full 

advantage of your machine’s features.

•

Smart Panel:  This program allows you to monitor the 

machine’s status and alerts you when an error occurs 

during printing.

•

Printer Settings Utility:  This program allows you to set 

up printer’s other options from your computer.

Before you begin, ensure that your system meets the following 

requirements:

Your machine supports the following Windows operating systems.