Samsung CLP-650 Series Manual De Usuario

Using Print Materials

4.3

To load print material in the Multi-purpose Tray:

Lower the Multi-purpose Tray and unfold the paper support 
extension, as shown. 

If you are using paper, flex or fan the edge of the paper 
stack to separate the pages before loading.

Load the print material with the print side down.

Squeeze the paper width guide and slide it to the edge of 
the print material without causing it to bend.

If you want to print on previously printed paper from the 

Multi-purpose Tray, the printed side should be facing up 
with the uncurled edge toward the printer. If you 
experience problems with the paper feeding, turn the 

paper around.

: Make sure that you have not loaded too much print 

material. The print material buckles if you load a stack that is 
too deep or if you push it in too far.

When you print a document, set the paper source to 
Multi-Purpose Tray and select the appropriate paper size 
and type in the software application. For details, see the 

Software Section.

: After printing, fold away 

the paper support extension and 
close the Multi-purpose Tray.

 

You can manually load a sheet of print material in the Multi-
purpose Tray if you select Manual Feed in the Source option 

from the Paper tab when you change print settings to print a 
document. For details about changing print settings, see the 
Software Section. Manually loading paper can be helpful 

when you want to check the print quality after each page is 
printed. 

This loading procedure is almost the same as the procedure for 

loading in the Multi-purpose Tray, except you load paper sheet-
by-sheet in the tray, send print data to print the first page, and 
press the On Line/Continue button (

) on the control panel 

to print each following page.

Lower the Multi-purpose Tray and unfold the paper support 
extension, as shown.

Load a sheet of print material with the print side down.