Samsung ML-3560 Series Manual De Usuario

Setting Up Your Printer

2.2

Pull the paper tray out of the printer and remove the 
packing tape and the packing material inside of the tray.

Select a level, stable place with adequate space for air 
circulation. Allow extra space for opening covers and trays. 
The area should be well-ventilated and away from direct 
sunlight or sources of heat, cold, and humidity. Do not set the 
printer close to the edge of your desk or table. 

Front: 482.6 mm 
(enough space so that 
trays can be opened 
or removed)
Back: 320 mm 
(enough space to 
allow opening of the 
rear output tray)
Right: 100 mm 
(enough space for 
ventilation)
Left: 100 mm 
(enough space for 
ventilation)

320mm(12.6in)

482.6mm(19in)

100mm

(3.9in)

100mm

(3.9in)

Open the top cover. Pull up on the handle to open the 
cover.

Remove the starter toner cartridge from its bag.

: Do not use sharp objects, such as a knife or 

scissors, to open the toner cartridge package. They might 

scratch the drum of the cartridge.

Locate the sealing tape at the end of the toner cartridge. 
Carefully pull the tape completely out of the cartridge and 
discard it.

:

• The sealing tape should be longer than 60 cm when correctly 

removed.

• Holding the toner cartridge, pull the sealing tape straight to 

remove it from the cartridge. Be careful not to cut the tape. 

If this happens, you cannot use the toner cartridge.

• Refer to the helpful pictures on the cartridge wrapping paper.