Samsung CLP-660 Series Manual De Usuario

6.4   

<Maintenance>

Grasp the handles on the toner cartridge and pull to remove the 
cartridge from the machine.

If you open the front door, be careful not to touch the 
underneath of the control panel (the lower part of the fuser unit). 
The temperature of the fuser unit might be high and could 
damage your skin.

When you open the front door and work inside the machine, it is 
highly recommend that you remove the paper transfer belt first. 
Because the work you do could contaminate the paper transfer 
belt.

Holding both handles on the toner cartridge, thoroughly rock it from 
side to side to redistribute the toner.

If toner gets on your clothing, wipe it off with a dry
cloth and wash it in cold water. Hot water sets toner into
fabric.

Slide the toner cartridge back into the machine.

Close the front cover. Make sure the cover is securely latched.

If the front cover is not completely closed, the machine will not 
operate.

The machine uses four colors and has a different toner cartridge for each 
one: yellow (Y), magenta (M), cyan (C), and black (K).
• The status LED and the toner-related message on the display indicate 

which individual toner cartridge should be replaced.

At this stage, the toner cartridge needs to be replaced. Check the type of 
toner cartridge for your machine. (See "Supplies" on page 8.1.)

Turn the machine off, then wait a few minutes for the machine to 
cool.

Using the handle, completely open the front cover. 

• Do not touch the green surface, the OPC drum or the front of 

each toner cartridge, with your hands or any other material. 
Use the handle on each cartridge in order to avoid touching 
this area.

• Be careful not to scratch the surface of the paper transfer 

belt.

• If you leave the front cover open for more than a few minutes, 

the OPC drum can be exposed to light. This will cause 
damage to the OPC drum. Close the front cover should the 
installation need to be halted for any reason.