Samsung ML-3470 Manual De Usuario

.5   

<Introduction>

Select a level, stable place with adequate space for air circulation. Allow 
extra space for opening covers and trays. 

The area should be well-ventilated and away from direct sunlight or 
sources of heat, cold, and humidity. Do not set the printer close to the 
edge of your desk or table.

: 500 mm (enough space 

so that trays can be opened or 
removed)

: 350 mm (enough space 

to allow opening of the rear 
cover

 or the duplex unit)

: 100 mm (enough space 

for ventilation)

: 100 mm (enough space 

to allow opening of the control 
board cover)

The print quality is affected by atmospheric pressure, which is 
determined by the height of the machine above sea level. The following 
information will guide you on how to set your machine to the best print 
quality or best quality of print.

Before you set the altitude value, find the altitude where you are using 
the machine. 

Ensure that you have installed the printer driver with the provided     
Printer Software CD.

Double-click the Smart Panel icon on the Windows task bar 

(or Notification Area in Linux). 

You can also click Smart Panel on the status bar in Mac OS X.

Click Printer Setting.

Click Setting > Altitude Adjustment. Select the appropriate value 
from the dropdown list, and then click Apply. 

IIf your machine is connected to a network, SyncThru Web 
Service

 screen appears automatically. Click Machine Settings 

> Setup (or Machine Setup) > Altitude Adj. Select the 
appropriate altitude value, and then click Apply.

0

High 3

High 2

High 1

Normal