Samsung ML-3470 Manual De Usuario

.4   

<System setup>

Use the Emulation menu to configure printer language emulation.

This menu sets the PCL emulation configuration. You can set the font 
type, symbol type, lines per page, and point size. 

This item allows you to maintain your printer.
•

: Cleans the OPC drum of the 

cartridge and produces a cleaning sheet with 
toner debris on it.

•

: Cleans the fuser unit inside of the 

printer and produces a cleaning sheet with 
toner debris on it.

• CLR Empty Msg.: Prevents the Toner Low 

 message from appearing on the 

display. Once you have selected On, this 
setting will be permanently written to the 
memory of the toner cartridge, and this menu 
will be disappeared from the Maintenance 
menu.

•

: This item allows you to check how 

many pages are printed and how much toner 
are left in the cartridge.

This menu item allows you to restore the printer’s 
factory default settings.

The printer language defines how the computer 
communicates with the printer. 
If you select Auto, your printer can change the 
printer language automatically.

See the tables on page 2.4 to configure the printer 
language.

You can select the standard font to be used in PCL 
emulation. 
• PCL1~PCL7’s interval between letters is fixed, and 

PCL8~PCL45’s interval is proportional to the font 
type and point size. You can adjust the font size of 
PCL1~PCL7 using the Pitch item, and 
PCL8~PCL45 can do using 

 item.

• PCL46~PCL54’s interval and point size are fixed. 

This menu provides you with the Print PS Error menu item. 

This menu sets the EPSON emulation configuration.

This item selects the symbol to be used in PCL 
emulation. The symbol is the group of numbers, 
marks, and special signs being used when printing 
letters. 

When you select one between PCL8 and PCL45 from 
the Typeface menu, you can determine the font size by 
setting the height of the characters in the font. 

This item lets you select the version of Courier font to 
use.

When you select one between PCL1 and PCL7 from 
the Typeface menu, you can determine the font size by 
setting the number of characters that will print in one 
horizontal inch of type. The default value, 10 is the 
best size. 

This item allows you to set vertical spacing from 5 to 
128 lines for the default paper size. The lines may 
differ according to the paper size and printing 
orientation. 

You can select whether or not your printer prints an 
error list when a PS error occurs.
• Select On to print PS 3 emulation errors. If an error 

occurs, the job stops processing, the error message 
prints, and the printer flushes the job. 

• If this menu is set to Off, the job is flushed without an 

indication of the error.

You can select the standard font will be used in 
EPSON emulation. 

This item allows you to select a character set of the 
desired language.

This item selects the character set.

You can determine the font size by setting the number 
of characters that will print in one horizontal inch of 
type.